HGV / Commercial Vehicle Brake Tester
Brake tester function and description
RRT-7500 & RRT-9500 truck brake testers are specially designed by JEVOL for testing trucks whose max single axle load is less than 15T
- RRT Series products can not only test brake force, brake efficiency, brake imbalance and friction efficiency, but also axle load, wheel load and ovality.
- Truck brake tester can be used in garages and vehicle inspection stations.
- Together with other JEVOL products such as sideslip tester, speedometer, play detector, headlight tester and emission tester to compose a vehicle test lane.
- With excellent coating workmanship, the corundum roller has more than 200,000 lifespan.
- Equipped with self-stop function, which will stop automatically in case of overload to protect the machine.(only with Jevol Control System).
- Split-type design enables the device to be applicable to different wheel track.
- Pedal Force Meter is available as an option upon requirements of some countries.
- JEVOL special design makes two-direction entry of 10T truck brake tester possible, which allows the vehicle to drive in from either front or rear side.For more details, please contact us directly
- The lifting function can be selected to give consideration to the detection of both cars and trucks.
For more information please
Transport, installation and calibration not included.
Specifications
| Item | RRT-7500 | RRT-9500 |
|---|---|---|
| Max axle load | 10T | 15T |
| Test speed | 2.5km/h | 2.5km/h |
| Brake force range | 0-30kN | 0-45kN |
| Motor | 11kW*2 | 15kW*2 |
| Power supply | 380V/50Hz | 380V/50Hz |
| Adhesion coefficient | 0.8 | 0.8 |
| Roller diameter | 245mm | 245mm |
| Roller lengtd | 1000mm | 1200mm |
| dimensions (LxWxH) | 1900x1024x470mm | 2170x980x440mm |
Products you might be interested in
FAQs
What is an HGV or commercial vehicle brake tester?
An HGV brake tester is a heavy-duty vehicle testing system designed to measure braking performance on trucks, buses, trailers, and other commercial vehicles. It evaluates brake force, brake efficiency, brake imbalance, friction efficiency, axle load, wheel load, and brake ovality.
What vehicles can the RRT-7500 and RRT-9500 brake testers inspect?
The RRT-7500 is designed for commercial vehicles with a maximum axle load of 10 tonnes, while the RRT-9500 supports axle loads up to 15 tonnes. These systems are ideal for HGVs, trucks, buses, and other heavy commercial vehicles.
What brake performance tests can the system perform?
The brake tester measures brake force, brake efficiency, brake imbalance, friction efficiency, axle load, wheel load, and ovality. These tests help ensure vehicle safety, compliance, and optimal braking performance.
Where can commercial vehicle brake testers be used?
HGV brake testers are commonly used in commercial vehicle workshops, fleet maintenance facilities, garages, MOT testing centres, and vehicle inspection stations where heavy vehicle safety inspections are carried out.
Can the brake tester be integrated into a complete vehicle inspection lane?
Yes. The brake tester can be combined with a sideslip tester, speedometer tester, play detector, headlight tester, and emission tester to create a comprehensive vehicle inspection and testing lane.
What is the benefit of the self-stop protection function?
The self-stop function automatically stops the machine if an overload condition is detected. This helps protect the brake tester from damage and improves operational safety when used with the Jevol Control System.
How durable are the brake tester rollers?
The corundum rollers are manufactured with high-quality coatings and are designed to provide a lifespan of more than 200,000 test cycles, ensuring long-term reliability and consistent testing performance.
What is the advantage of the split-type design?
The split-type design allows the brake tester to accommodate different wheel track widths, making it suitable for a wide variety of commercial vehicle configurations and axle arrangements.
Can vehicles enter the brake tester from either direction?
Yes. Jevol’s special design allows two-direction entry, enabling trucks to drive onto the brake tester from either the front or rear. This improves workflow efficiency and provides greater flexibility in vehicle testing facilities.
Are there optional features available for the HGV brake tester?
Yes. Optional features include a Pedal Force Meter for countries that require brake pedal force measurement and a lifting function that allows the system to test both passenger vehicles and heavy commercial vehicles using the same equipment.
