Vehicle Sideslip Tester
Vehicle Sideslip Tester
Today, time is money. Have you ever spent more than an hour doing aligner testing, only to find out that you didn’t need to do it? Our Car Sideslip Tester only needs 5 seconds for you to decide whether you need a wheel aligner test or not. It can test the comprehensive degree of the deviation. If the testing result is out of the normal range, then we need the Wheel Aligner to judge the main cause.
- Jevol designed RSS-500 Car Sideslip Tester to test the comprehensive degree of the deviation.
- High precise sideslip tester sensor ensures the accurate reach 0.1mm.
- Pre-check the vehicle toe-in before wheel alignment, saving your time.
- Only 5 seconds by driving through to results, Sideslip（mm）.
- It can be used in garages and vehicle inspection stations, to compose as a vehicle safety test lane with Car Brake Tester, Suspension Tester and Speedometer.
For more information please
Delivery, installation and calibration not included
Specifications
| Item | RSS-500 |
|---|---|
| Axle load | 3T |
| Through speed | 5-10km/h |
| Testing range | ±15mm |
| Testing plate Length | 800mm |
| Dimensions(LxWxH) | 800x460x60mm |
Products you might be interested in
HGV / Commercial Vehicle Mobile Brake Tester
Jevol designed RRT-2500M, RRT-7500M and RRT-9500M Mobile Brake Tester
Explore
Pneumatic Single Cylinder Tyre Changer
Equipped with a multi-function tyre press, can press open 16/17.5/19.5/22.5-inch...
Explore
Three Cylinder Electric Type Tyre Changer
The three-cylinder system provides enhanced lifting force, improved bead...
Explore
TVNHD-8000 / 8101 Headlight Tester
Used to measure the luminous intensity, height and optic axis offset of...
Explore
Vehicle Dimension Laser Scanning System
Vehicle Dimension Laser Scanning System, Easy to operate, laser radar...
Explore
FAQs
How quickly can the RSS-500 Vehicle Sideslip Tester check a vehicle?
The RSS-500 can provide a sideslip result in approximately 5 seconds as the vehicle drives through the tester. This makes it useful as a quick pre-check before carrying out a more detailed wheel alignment test.
Can the RSS-500 identify vehicles that may need wheel alignment?
Yes. The Vehicle Sideslip Tester measures the overall degree of vehicle deviation and can help identify potential toe-in or toe-out issues. If the result is outside the normal range, a wheel alignment test can then be carried out to investigate the underlying cause.
How accurate is the RSS-500 sideslip measurement?
The RSS-500 uses a high-precision sideslip sensor with measurement accuracy of up to 0.1mm. Its testing range is ±15mm, providing a detailed measurement of vehicle sideslip during the drive-through test.
What axle load can the Vehicle Sideslip Tester accommodate?
The RSS-500 has a maximum 3-tonne axle load, making it suitable for compatible cars and light vehicles. The vehicle’s axle load should be checked against the equipment specification before testing.
What speed should a vehicle use when driving over the sideslip tester?
The recommended through speed for the RSS-500 is 5–10 km/h. Maintaining the appropriate testing speed helps ensure the sideslip measurement is taken under the intended operating conditions.
Can the RSS-500 be used before a full wheel alignment test?
Yes. One of its key applications is pre-checking vehicle toe-in before wheel alignment. This can help workshops identify vehicles that require further alignment investigation instead of carrying out a full alignment test unnecessarily.
Is the RSS-500 suitable for garages and vehicle inspection stations?
Yes. The Vehicle Sideslip Tester is designed for use in garages and vehicle inspection stations. It can provide a fast check of vehicle driving deviation as part of routine inspection and maintenance procedures.
Can the Vehicle Sideslip Tester be integrated with other garage equipment?
Yes. The RSS-500 can be combined with equipment such as a Car Brake Tester, Suspension Tester and Speedometer Tester to create a more complete vehicle safety test lane.
What are the dimensions of the RSS-500 testing plate?
The RSS-500 has a testing plate measuring 800mm in length, with overall equipment dimensions of approximately 800 × 460 × 60mm. These dimensions should be considered when planning the installation area.
Is installation and calibration included with the RSS-500 Vehicle Sideslip Tester?
Delivery, installation and calibration are not included with the listed equipment. These requirements should be discussed with Tech Vezoto when requesting a quotation so the installation and commissioning requirements can be confirmed.
